<?php 
$this->E_D("DROP TABLE IF EXISTS `db_task_flow`;");
$this->E_C("CREATE TABLE `db_task_flow` (
  `task_flow_id` int(20) NOT NULL AUTO_INCREMENT COMMENT '任务流程id',
  `task_id` int(20) DEFAULT NULL COMMENT '任务id',
  `type_id` int(20) DEFAULT NULL COMMENT '工种id',
  `type_name` varchar(255) DEFAULT NULL COMMENT '工种名称',
  `order_id` int(20) DEFAULT NULL COMMENT '工序第几步',
  `flow_craft_id` int(20) DEFAULT NULL COMMENT '工序流程工序id',
  `product_name` varchar(255) DEFAULT NULL COMMENT '产品名称',
  `product_id` int(20) DEFAULT NULL COMMENT '产品id',
  `pre_num` int(20) DEFAULT NULL COMMENT '预计总数量',
  `pass_num` int(20) DEFAULT NULL COMMENT '通过总数量',
  `is_final` tinyint(1) DEFAULT NULL COMMENT '是否是最后一步',
  `is_complete` tinyint(1) DEFAULT NULL COMMENT '是否完成',
  `craft_id` int(20) DEFAULT NULL COMMENT '工艺id',
  `craft_name` varchar(255) DEFAULT NULL COMMENT '工艺名称',
  `product_desc` varchar(255) DEFAULT NULL COMMENT '产品描述',
  `task_time` varchar(20) DEFAULT NULL COMMENT '  任务时间',
  `task_name` varchar(255) DEFAULT NULL COMMENT '任务名称',
  `task_inner_order` varchar(255) DEFAULT NULL,
  `task_pici` varchar(255) DEFAULT NULL,
  `status` int(1) DEFAULT '1',
  PRIMARY KEY (`task_flow_id`)
) ENGINE=MyISAM AUTO_INCREMENT=335 DEFAULT CHARSET=utf8");
$this->E_D("replace into `db_task_flow` values('47','16','7','工种02','3','21','产品002','11','0','0','0','0','12','工艺004-02','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('46','16','7','工种02','2','20','产品002','11','0','0','0','0','11','工艺003-02','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('45','16','6','工种01','1','19','产品002','11','10000','0','0','0','10','工艺002-01','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('42','15','7','工种02','0','24','产品001','10','880','-1','0','0','11','工艺003-02','001的描述','1591368959','task001',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('43','15','6','工种01','1','25','产品001','10','7307','0','1','0','9','工艺001-01','001的描述','1591368959','task001',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('44','16','6','工种01','0','18','产品002','11','10000','10000','0','0','9','工艺001-01','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('48','16','8','工种03','4','23','产品002','11','0','0','0','0','14','工艺006-03','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('49','16','8','工种03','5','22','产品002','11','0','0','1','0','13','工艺005-03','002的描述','1591368968','task002',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('50','17','6','工种01','0','27','测试001','12','0','1000','1','0','9','工艺001-01','好的产品','1591863159','任务测试001',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('51','18','6','工种01','0','28',' 测试产品2','13','4001','9999','0','0','9','工艺001-01','sdfsdf','1591948149','测试任务2',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('52','18','7','工种02','1','29',' 测试产品2','13','-100','10','1','0','11','工艺003-02','sdfsdf','1591948149','测试任务2',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('53','19','10','测试工种','0','31','测试产品999','14','0','9990','1','0','15','测试工艺','999','1591951277','测试任务999',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('54','20','10','测试工种','0','31','测试产品999','14','911','200','1','0','15','测试工艺','999','1592466371','11111',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('55','21','7','工种02','0','24','产品001','10','21622','0','0','0','11','工艺003-02','001的描述','1592466382','11112',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('56','21','6','工种01','1','25','产品001','10','0','0','1','0','9','工艺001-01','001的描述','1592466382','11112',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('87','30','13','磨孔','2','34','2020061900A','15','200','0','1','0','19','孔类工艺','20200619测试','1592533386','20200619',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('86','30','12','无心磨','1','33','2020061900A','15','599','200','0','0','18','无心工艺','20200619测试','1592533386','20200619',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('85','30','11','平面磨','0','32','2020061900A','15','70','100','0','0','17','平面工艺','20200619测试','1592533386','20200619',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('150','41','11','平面磨','0','77','625/01','23','0','0','0','0','20','磨双端面','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('107','34','13','磨孔','5','62','B1810.01-01（PT）','20','0','0','1','0','25','粗磨孔','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('108','35','13','磨孔','0','50','B1810.01-01（GB）','21','87225','0','0','0','26','精磨孔','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('109','35','12','无心磨','1','51','B1810.01-01（GB）','21','0','0','0','0','27','修磨外圆-1','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('106','34','14','检测','4','61','B1810.01-01（PT）','20','0','0','0','0','24','磁粉探伤','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('105','34','12','无心磨','3','60','B1810.01-01（PT）','20','0','0','0','0','23','精磨外圆-2','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('104','34','12','无心磨','2','59','B1810.01-01（PT）','20','24999','0','0','0','22','精磨外圆-1','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('102','34','11','平面磨','0','57','B1810.01-01（PT）','20','47425','20000','0','0','20','磨双端面','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('103','34','12','无心磨','1','58','B1810.01-01（PT）','20','35000','24998','0','0','21','粗磨外圆','','1594777922','PT200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('110','35','12','无心磨','2','52','B1810.01-01（GB）','21','0','0','0','0','28','修磨外圆-2','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('111','35','18','液抛','3','53','B1810.01-01（GB）','21','0','0','0','0','29','退磁','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('112','35','18','液抛','4','54','B1810.01-01（GB）','21','0','0','0','0','30','抛窜','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('113','35','18','液抛','5','55','B1810.01-01（GB）','21','0','0','0','0','31','脱水防锈','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('114','35','19','清洗','6','56','B1810.01-01（GB）','21','0','0','0','0','32','清洗防锈','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('115','35','14','检测','7','63','B1810.01-01（GB）','21','0','0','0','0','33','表观分选','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('116','35','14','检测','8','64','B1810.01-01（GB）','21','0','0','1','0','34','硬度、尺寸分选','','1594777960','GB200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('117','36','16','装配','0','65','B1810.01（GR）','22','-10','0','0','0','35','装配','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('118','36','14','检测','1','66','B1810.01（GR）','22','0','0','0','0','36','内复圆检测','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('119','36','19','清洗','2','73','B1810.01（GR）','22','0','0','0','0','37','成品清洗','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('120','36','14','检测','3','74','B1810.01（GR）','22','0','0','0','0','38','CCD检测','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('121','36','15','检验','4','75','B1810.01（GR）','22','0','0','0','0','39','成品检验','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('122','36','17','包装','5','76','B1810.01（GR）','22','0','0','1','0','40','包装','','1594777997','GR200717','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('123','37','11','平面磨','0','57','B1810.01-01（PT）','20','66647','0','0','0','20','磨双端面','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('124','37','12','无心磨','1','58','B1810.01-01（PT）','20','0','0','0','0','21','粗磨外圆','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('125','37','12','无心磨','2','59','B1810.01-01（PT）','20','0','0','0','0','22','精磨外圆-1','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('126','37','12','无心磨','3','60','B1810.01-01（PT）','20','0','0','0','0','23','精磨外圆-2','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('127','37','14','检测','4','61','B1810.01-01（PT）','20','0','0','0','0','24','磁粉探伤','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('128','37','13','磨孔','5','62','B1810.01-01（PT）','20','0','0','1','0','25','粗磨孔','','1594778028','PT200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('129','38','13','磨孔','0','50','B1810.01-01（GB）','21','66647','0','0','0','26','精磨孔','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('130','38','12','无心磨','1','51','B1810.01-01（GB）','21','0','0','0','0','27','修磨外圆-1','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('131','38','12','无心磨','2','52','B1810.01-01（GB）','21','0','0','0','0','28','修磨外圆-2','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('132','38','18','液抛','3','53','B1810.01-01（GB）','21','0','0','0','0','29','退磁','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('133','38','18','液抛','4','54','B1810.01-01（GB）','21','0','0','0','0','30','抛窜','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('134','38','18','液抛','5','55','B1810.01-01（GB）','21','0','0','0','0','31','脱水防锈','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('135','38','19','清洗','6','56','B1810.01-01（GB）','21','0','0','0','0','32','清洗防锈','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('136','38','14','检测','7','63','B1810.01-01（GB）','21','0','0','0','0','33','表观分选','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('137','38','14','检测','8','64','B1810.01-01（GB）','21','0','0','1','0','34','硬度、尺寸分选','','1594778064','GB200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('138','39','16','装配','0','65','B1810.01（GR）','22','56647','0','0','0','35','装配','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('139','39','14','检测','1','66','B1810.01（GR）','22','0','0','0','0','36','内复圆检测','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('140','39','19','清洗','2','73','B1810.01（GR）','22','0','0','0','0','37','成品清洗','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('141','39','14','检测','3','74','B1810.01（GR）','22','0','0','0','0','38','CCD检测','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('142','39','15','检验','4','75','B1810.01（GR）','22','0','0','0','0','39','成品检验','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('143','39','17','包装','5','76','B1810.01（GR）','22','0','0','1','0','40','包装','','1594778106','GR200805','MH20B1810.0114BA','BS200711','1');");
$this->E_D("replace into `db_task_flow` values('144','40','11','平面磨','0','57','B1810.01-01（PT）','20','59500','39991','0','0','20','磨双端面','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('145','40','12','无心磨','1','58','B1810.01-01（PT）','20','40000','0','0','0','21','粗磨外圆','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('146','40','12','无心磨','2','59','B1810.01-01（PT）','20','0','0','0','0','22','精磨外圆-1','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('147','40','12','无心磨','3','60','B1810.01-01（PT）','20','0','0','0','0','23','精磨外圆-2','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('148','40','14','检测','4','61','B1810.01-01（PT）','20','0','0','0','0','24','磁粉探伤','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('149','40','13','磨孔','5','62','B1810.01-01（PT）','20','0','0','1','0','25','粗磨孔','','1595384787','PT200806','MH20B1810.0114BA','BS200422','1');");
$this->E_D("replace into `db_task_flow` values('151','41','12','无心磨','1','78','625/01','23','0','0','0','0','21','粗磨外圆','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('152','41','12','无心磨','2','79','625/01','23','0','0','0','0','22','精磨外圆-1','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('153','41','39','平面 无心磨','3','81','625/01','23','0','0','0','0','41','精研外圆','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('154','41','38','磨加工','4','82','625/01','23','0','0','0','0','42','精磨外沟','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('155','41','38','磨加工','5','83','625/01','23','0','0','0','0','43','精研外沟','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('156','41','38','磨加工','6','84','625/01','23','0','0','0','0','44','超精检验','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('157','41','12','无心磨','7','85','625/01','23','0','0','0','0','27','修磨外圆-1','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('158','41','19','清洗','8','88','625/01','23','0','0','1','0','32','清洗防锈','','1595572288','GD2020718/01','GD2020718/01','WS200609','1');");
$this->E_D("replace into `db_task_flow` values('176','43','38','磨加工','7','96','625/02','24','0','0','0','0','47','精研内沟','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('175','43','38','磨加工','6','95','625/02','24','0','0','0','0','46','精磨内沟','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('174','43','39','平面 无心磨','5','94','625/02','24','0','0','0','0','41','精研外圆','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('173','43','38','磨加工','4','93','625/02','24','0','0','0','0','45','孔径检测','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('172','43','13','磨孔','3','92','625/02','24','0','0','0','0','26','精磨孔','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('171','43','12','无心磨','2','91','625/02','24','0','0','0','0','22','精磨外圆-1','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('170','43','12','无心磨','1','90','625/02','24','800','0','0','0','21','粗磨外圆','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('169','43','11','平面磨','0','89','625/02','24','892','799','0','0','20','磨双端面','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('177','43','38','磨加工','8','97','625/02','24','0','0','0','0','44','超精检验','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('178','43','19','清洗','9','99','625/02','24','0','0','1','0','32','清洗防锈','','1595577613','GD2020715/02','GD2020715/02','NS190110','1');");
$this->E_D("replace into `db_task_flow` values('179','44','11','平面磨','0','89','625/02','24','0','0','0','0','20','磨双端面','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('180','44','12','无心磨','1','90','625/02','24','0','0','0','0','21','粗磨外圆','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('181','44','12','无心磨','2','91','625/02','24','0','0','0','0','22','精磨外圆-1','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('182','44','13','磨孔','3','92','625/02','24','0','0','0','0','26','精磨孔','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('183','44','38','磨加工','4','93','625/02','24','0','0','0','0','45','孔径检测','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('184','44','39','平面 无心磨','5','94','625/02','24','0','0','0','0','41','精研外圆','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('185','44','38','磨加工','6','95','625/02','24','0','0','0','0','46','精磨内沟','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('186','44','38','磨加工','7','96','625/02','24','0','0','0','0','47','精研内沟','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('187','44','38','磨加工','8','97','625/02','24','0','0','0','0','44','超精检验','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('188','44','19','清洗','9','99','625/02','24','0','0','1','0','32','清洗防锈','','1595642640','GD2020406/02','GD2020406/02','NS200607','1');");
$this->E_D("replace into `db_task_flow` values('189','45','11','平面磨','0','57','B1810.01-01（PT）','20','10000','0','0','0','20','磨双端面','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('190','45','12','无心磨','1','58','B1810.01-01（PT）','20','0','0','0','0','21','粗磨外圆','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('191','45','12','无心磨','2','59','B1810.01-01（PT）','20','0','0','0','0','22','精磨外圆-1','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('192','45','12','无心磨','3','60','B1810.01-01（PT）','20','0','0','0','0','23','精磨外圆-2','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('193','45','14','检测','4','61','B1810.01-01（PT）','20','0','0','0','0','24','磁粉探伤','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('194','45','13','磨孔','5','62','B1810.01-01（PT）','20','0','0','1','0','25','粗磨孔','','1596155415','测试','123456','10100','0');");
$this->E_D("replace into `db_task_flow` values('195','46','16','装配','0','65','B1810.01（GR）','22','0','0','0','0','35','装配','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('196','46','14','检测','1','66','B1810.01（GR）','22','0','0','0','0','36','内复圆检测','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('197','46','19','清洗','2','73','B1810.01（GR）','22','0','0','0','0','37','成品清洗','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('198','46','14','检测','3','74','B1810.01（GR）','22','0','0','0','0','38','CCD检测','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('199','46','15','检验','4','75','B1810.01（GR）','22','0','0','0','0','39','成品检验','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('200','46','17','包装','5','76','B1810.01（GR）','22','0','0','1','0','40','包装','','1596174412','gb测试子任务1','MH20B1810.0113BA','BS200421','1');");
$this->E_D("replace into `db_task_flow` values('201','47','7','工种02','0','24','产品001','10','1','9','0','0','11','工艺003-02','001的描述','1596185581','想不到那你说',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('202','47','6','工种01','1','25','产品001','10','9','0','1','0','9','工艺001-01','001的描述','1596185581','想不到那你说',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('203','48','6','工种01','0','28',' 测试产品2','13','0','100','0','1','9','工艺001-01','sdfsdf','1596190549',' 测试产品222',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('204','48','7','工种02','1','29',' 测试产品2','13','95','5','1','0','11','工艺003-02','sdfsdf','1596190549',' 测试产品222',NULL,NULL,'1');");
$this->E_D("replace into `db_task_flow` values('232','52','11','平面磨','0','89','625/02','24','250','470','0','0','20','磨双端面','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('231','51','19','清洗','8','88','625/01','23','0','0','1','0','32','清洗防锈','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('230','51','12','无心磨','7','85','625/01','23','0','0','0','0','27','修磨外圆-1','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('228','51','38','磨加工','5','83','625/01','23','0','0','0','0','43','精研外沟','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('229','51','38','磨加工','6','84','625/01','23','0','0','0','0','44','超精检验','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('227','51','38','磨加工','4','82','625/01','23','0','0','0','0','42','精磨外沟','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('226','51','39','平面 无心磨','3','81','625/01','23','0','0','0','0','41','精研外圆','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('224','51','12','无心磨','1','78','625/01','23','900','0','0','0','21','粗磨外圆','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('225','51','12','无心磨','2','79','625/01','23','0','0','0','0','22','精磨外圆-1','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('223','51','11','平面磨','0','77','625/01','23','50','900','0','0','20','磨双端面','','1596591914','GD2020801/01','GD2020801/01','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('233','52','12','无心磨','1','90','625/02','24','713','0','0','0','21','粗磨外圆','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('234','52','12','无心磨','2','91','625/02','24','0','0','0','0','22','精磨外圆-1','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('235','52','13','磨孔','3','92','625/02','24','0','0','0','0','26','精磨孔','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('236','52','38','磨加工','4','93','625/02','24','0','0','0','0','45','孔径检测','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('237','52','39','平面 无心磨','5','94','625/02','24','0','0','0','0','41','精研外圆','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('238','52','38','磨加工','6','95','625/02','24','0','0','0','0','46','精磨内沟','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('239','52','38','磨加工','7','96','625/02','24','0','0','0','0','47','精研内沟','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('240','52','38','磨加工','8','97','625/02','24','0','0','0','0','44','超精检验','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('241','52','19','清洗','9','99','625/02','24','0','0','1','0','32','清洗防锈','','1596594055','GD2020807/02','GD2020807/02','NS200706','1');");
$this->E_D("replace into `db_task_flow` values('242','53','11','平面磨','0','57','B1810.01-01（PT）','20','82900','29900','0','0','20','磨双端面','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('243','53','12','无心磨','1','58','B1810.01-01（PT）','20','30000','0','0','0','21','粗磨外圆','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('244','53','12','无心磨','2','59','B1810.01-01（PT）','20','0','0','0','0','22','精磨外圆-1','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('245','53','12','无心磨','3','60','B1810.01-01（PT）','20','0','0','0','0','23','精磨外圆-2','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('246','53','14','检测','4','61','B1810.01-01（PT）','20','0','0','0','0','24','磁粉探伤','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('247','53','13','磨孔','5','62','B1810.01-01（PT）','20','0','0','1','0','25','粗磨孔','','1596594285','PT200816','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('248','54','13','磨孔','0','50','B1810.01-01（GB）','21','50000','0','0','0','26','精磨孔','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('249','54','12','无心磨','1','51','B1810.01-01（GB）','21','0','0','0','0','27','修磨外圆-1','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('250','54','12','无心磨','2','52','B1810.01-01（GB）','21','0','0','0','0','28','修磨外圆-2','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('251','54','18','液抛','3','53','B1810.01-01（GB）','21','0','0','0','0','29','退磁','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('252','54','18','液抛','4','54','B1810.01-01（GB）','21','0','0','0','0','30','抛窜','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('253','54','18','液抛','5','55','B1810.01-01（GB）','21','0','0','0','0','31','脱水防锈','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('254','54','19','清洗','6','56','B1810.01-01（GB）','21','0','0','0','0','32','清洗防锈','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('255','54','14','检测','7','63','B1810.01-01（GB）','21','0','0','0','0','33','表观分选','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('256','54','14','检测','8','64','B1810.01-01（GB）','21','0','0','1','0','34','硬度、尺寸分选','','1596594334','GB200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('257','55','13','磨孔','0','50','B1810.01-01（GB）','21','62900','0','0','0','26','精磨孔','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('258','55','12','无心磨','1','51','B1810.01-01（GB）','21','0','0','0','0','27','修磨外圆-1','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('259','55','12','无心磨','2','52','B1810.01-01（GB）','21','0','0','0','0','28','修磨外圆-2','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('260','55','18','液抛','3','53','B1810.01-01（GB）','21','0','0','0','0','29','退磁','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('261','55','18','液抛','4','54','B1810.01-01（GB）','21','0','0','0','0','30','抛窜','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('262','55','18','液抛','5','55','B1810.01-01（GB）','21','0','0','0','0','31','脱水防锈','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('263','55','19','清洗','6','56','B1810.01-01（GB）','21','0','0','0','0','32','清洗防锈','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('264','55','14','检测','7','63','B1810.01-01（GB）','21','0','0','0','0','33','表观分选','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('265','55','14','检测','8','64','B1810.01-01（GB）','21','0','0','1','0','34','硬度、尺寸分选','','1596594371','GB200816B','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('266','56','16','装配','0','65','B1810.01（GR）','22','99900','0','0','0','35','装配','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('267','56','14','检测','1','66','B1810.01（GR）','22','0','0','0','0','36','内复圆检测','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('268','56','19','清洗','2','73','B1810.01（GR）','22','0','0','0','0','37','成品清洗','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('269','56','14','检测','3','74','B1810.01（GR）','22','0','0','0','0','38','CCD检测','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('270','56','15','检验','4','75','B1810.01（GR）','22','0','0','0','0','39','成品检验','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('271','56','17','包装','5','76','B1810.01（GR）','22','0','0','1','0','40','包装','','1596594415','GR200816A','MH20B1810.0115BA','BS200717','1');");
$this->E_D("replace into `db_task_flow` values('272','57','11','平面磨','0','77','625/01','23','1000','0','0','0','20','磨双端面','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('273','57','12','无心磨','1','78','625/01','23','0','0','0','0','21','粗磨外圆','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('274','57','12','无心磨','2','79','625/01','23','0','0','0','0','22','精磨外圆-1','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('275','57','39','平面 无心磨','3','81','625/01','23','0','0','0','0','41','精研外圆','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('276','57','38','磨加工','4','82','625/01','23','0','0','0','0','42','精磨外沟','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('277','57','38','磨加工','5','83','625/01','23','0','0','0','0','43','精研外沟','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('278','57','38','磨加工','6','84','625/01','23','0','0','0','0','44','超精检验','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('279','57','12','无心磨','7','85','625/01','23','0','0','0','0','27','修磨外圆-1','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('280','57','19','清洗','8','88','625/01','23','0','0','1','0','32','清洗防锈','','1596604472','GD2020805/01','SD2020805','WS200706','1');");
$this->E_D("replace into `db_task_flow` values('281','58','42','热处理','0','125','LB7616.01','27','-100000','0','0','0','58','高频淬火','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('282','58','42','热处理','1','142','LB7616.01','27','0','0','0','0','67','回火','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('283','58','12','无心磨','2','126','LB7616.01','27','0','0','0','0','21','粗磨外圆','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('284','58','18','液抛','3','127','LB7616.01','27','0','0','0','0','30','抛窜','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('285','58','42','热处理','4','128','LB7616.01','27','0','0','0','0','59','区域检','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('286','58','14','检测','5','143','LB7616.01','27','0','0','0','0','68','涡流探伤','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('287','58','12','无心磨','6','129','LB7616.01','27','0','0','0','0','22','精磨外圆-1','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('288','58','12','无心磨','7','130','LB7616.01','27','0','0','0','0','23','精磨外圆-2','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('289','58','12','无心磨','8','131','LB7616.01','27','0','0','0','0','60','精磨外圆-3','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('290','58','18','液抛','9','132','LB7616.01','27','0','0','0','0','61','液抛','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('291','58','18','液抛','10','133','LB7616.01','27','0','0','0','0','31','脱水防锈','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('292','58','19','清洗','11','134','LB7616.01','27','0','0','0','0','32','清洗防锈','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('293','58','14','检测','12','135','LB7616.01','27','0','0','0','0','33','表观分选','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('294','58','14','检测','13','137','LB7616.01','27','0','0','0','0','65','除油清洗','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('295','58','14','检测','14','138','LB7616.01','27','0','0','0','0','63','尺寸分选','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('296','58','14','检测','15','139','LB7616.01','27','0','0','0','0','64','激光打标','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('297','58','14','检测','16','140','LB7616.01','27','0','0','0','0','66','防锈','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('298','58','17','包装','17','141','LB7616.01','27','0','0','1','0','40','包装','','1597303160','GZ200901','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('299','59','42','热处理','0','125','LB7616.01','27','60000','35000','0','0','58','高频淬火','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('300','59','42','热处理','1','142','LB7616.01','27','40000','0','0','0','67','回火','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('301','59','12','无心磨','2','126','LB7616.01','27','0','0','0','0','21','粗磨外圆','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('302','59','18','液抛','3','127','LB7616.01','27','0','0','0','0','30','抛窜','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('303','59','42','热处理','4','128','LB7616.01','27','0','0','0','0','59','区域检','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('304','59','14','检测','5','143','LB7616.01','27','0','0','0','0','68','涡流探伤','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('305','59','12','无心磨','6','129','LB7616.01','27','0','0','0','0','22','精磨外圆-1','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('306','59','12','无心磨','7','130','LB7616.01','27','0','0','0','0','23','精磨外圆-2','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('307','59','12','无心磨','8','131','LB7616.01','27','0','0','0','0','60','精磨外圆-3','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('308','59','18','液抛','9','132','LB7616.01','27','0','0','0','0','61','液抛','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('309','59','18','液抛','10','133','LB7616.01','27','0','0','0','0','31','脱水防锈','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('310','59','19','清洗','11','134','LB7616.01','27','0','0','0','0','32','清洗防锈','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('311','59','14','检测','12','135','LB7616.01','27','0','0','0','0','33','表观分选','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('312','59','14','检测','13','137','LB7616.01','27','0','0','0','0','65','除油清洗','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('313','59','14','检测','14','138','LB7616.01','27','0','0','0','0','63','尺寸分选','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('314','59','14','检测','15','139','LB7616.01','27','0','0','0','0','64','激光打标','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('315','59','14','检测','16','140','LB7616.01','27','0','0','0','0','66','防锈','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");
$this->E_D("replace into `db_task_flow` values('316','59','17','包装','17','141','LB7616.01','27','0','0','1','0','40','包装','','1597305530','GZ200901A','MH20LB7616.0117BA','LS200802','1');");

 ?>